Changzhou Yimin Drying Equipment Co., Ltd

Working principle and advantages

 

Raw material are spreaded on the conveying belt through suitable auxiliary mechanism such as distributor, vibrating belt, pulverizer of granulator, belt passes the channel which containing one or several heating units; heating unit is equipped with air heater and circle system. Each channel has one or several damp exhaust system. When raw material is transited, hot air passes through or over it, in this way it makes raw material dry uniformly. 

 

Part two  Requirements and parameters

 

*Raw material name: fruits

*Raw material water content rate: 60%~80%

*Finished products water content: 3%~5%

*production capacity: 100kg/h –5000kg/h 

*Heat source: furnace ( fueled source can be coal, oil natural gas and electricity)

*Equipment material use: the area which contact with material is stainless steel, outside is Carbon steel

 

 

Depend on our drying experience, under this conditions, average mesh belt drying intension is 7kg HO² /m²•h， the required maximum heat quantity for dehydrating 1 kg water is 1500kcal/kg.

 

The conveyor drier adopts three driers in series, the continuous feed and discharge method is suitable for extensive and continuous production. The production capacity is up to 100kg per hour.

1, Single layer conveyor drier' s effective drying length is 52m, width is 2m and the total height is 3.18m. Heating by recyclable upper and lower wind can save energy effectively, and the separate board in the drying chamber makes the heating well-distributed. The temperature is changeable from 60 to 130 centi degrees. And the running speed of conveyor is adjustable within 20 to 200 minutes.
2, The total heating area is 104 square meters, and the three drier's speed can be different according to the material need.
3, All the parts that have touch with the material are made of stainless steel.
4, Every machine is allocated with washing facility to keep the machines to be clean and also recycle waste water.